Darex XPS-16 Operating Instructions Instrukcja Użytkownika Pobierz pdf (Strona 99)

User Manual Page 4

4. To loosen and remove belt, insert a flat blade

screw driver in the slotted bearing screw.

5. On the back of the casting is a 4 mm button

head screw that locks the bearing in place.

Loosen with a 2.5mm Allen wrench. Rotate the

bearing screw counterclockwise and loosen

the belt. Slip the belt off the sprockets and

remove.

Loosen

4MM locking screw

6. Replace the belt. Using two fingers on a flat

blade screw driver, rotate slotted bearing

screw clockwise until belt just pulls to a flat

condition. There will be a noticeable increase

in resistance past this point of rotation.

Continue rotating another 1/16". Hold screw

driver in this position and secure bearing lock

screw.

Tighten

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 127 128

Brak uwag

Darex XPS-16 Operating Instructions Instrukcja Użytkownika Strona 99